iCheck Iodine

iCheck™ Iodine is a state-of-the–art and the first of its kind portable photometer. It determines iodine quantitatively. iCheck™ Iodine measures the purple color reaction in the test vial and calculates the iodine content in mg/L. It is used to measure iodization level in salt.

iCheck Iodine measures iodine in salt

iCheck Device

iCheck Test Kit

What is inside

iCheck Iodine: Case Content

A – iCheck device, B – Rechargeable batteries & charger, C – USB -B cable for data transfer, D – Vial stand, E – Iodine Standard, F – USB stick with User Manual, G – User Manual, H – Weighing dish, I – Calibration weight, J – Balance, K – Iodine Test Sample.

iCheck Iodine: Test Kit Content

A – iCheck Iodine Reagent Vials x 100, B – Additive vials x 20, C – 1 mL syringe x 120, D – Needle x 120, E – Vial labels/stickers.

Technical Specifications

Sample


Analyte	Iodine as potassium iodate
Sample	Table salt
Sample preparation	Dilution in distilled or bottled water
Sample volume per analysis	1.0 mL (1000 μL)
Concentration range	>3 ppm (mg/kg), samples must be diluted in water; minimum dilution factor is 1:3

Device


Analytical method	Photometric determination of iodine concentration using colorimetric reaction
Units displayed	mg/L
Linear range	1.0 – 13.0 mg/L
Calibration	Factory set (standards included for control)
Time per analysis	<10 min
Enviroment	20-30°C, no direct sunlight
Accuracy at 95% confidence interval at 25°C	<±17%
Method comparison	Iodometric titration
User training	1 day training
Use	Laboratory and field
Data output	Sample #, Batch #, Result, Date, Time (in transferred data)
Connectivity and data	Results are stored in the device and transferred to a PC via USB
Power source	NiMH rechargeable batteries included; AA 1.2 or 1.5V
Warranty	2 years
Device weight	0.45 kg
Device dimensions	11 x 4 x 20 cm (W x H x L)

Test Kit


Content	100 reagent vials and 20 additive vials; 120 syringes – 1.0 mL; 120 needles – 0.8mm x16mm
Chemical composition	Starch, potassium iodide, phosphoric acid
Volume per reagent vial	1.9 mL
Shelf life	12 months at 20 – 30°C, no direct sunlight, upright
Dimension of test kit	26 x 14.5 x 16.5 cm
Disposable instructions	Non-hazardous waste
Optional equipment	50 mL falcons, weighing dishes, reference samples

More Information

Accessories

iCheck Iodine Training Set

Training kit to get started with your iCheck Iodine. Content: reagent vials (N=18), additive vials (N=2), syringes and needles (N=22), Iodine Test Sample

Iodine Standard

Solid grey-glass standard for device control of iCheck Iodine. Standard is included with our iCheck device. In case it is lost or damaged it can be reordered separately.

Charger and batteries

Charger and four 2100 mAh rechargeable.

Falcons, 50 mL

50 mL Falcon tubes for sample preparation.

Glass bottle, 500 mL

500 mL glass laboratory bottle with tight screw on cap for sample preparation.

Spiked control samples

Food samples spiked with customized concentration of vitamins and minerals according to customer specification.

Vials stand

Vial stand for holding eight iCheck reagent vials.

Balance

Portable, battery-run balance. Lowest weight and resolution 0.01 g, maximum weight 200 g. Comes with 100g calibration weight

USB-B cable

USB-B cable for data transfer of measurement results from iCheck to computer.